Nano Splasher

Specifically designed for above ground pools and spas, the Nano Splasher, fully titanium, ‘user friendly’ heater has all the benefits of superior performance, 100% efficiency, and most importantly, maximum safety for peace of mind. The Nano Splasher is the perfect solution for heating pools with a flow rate as low as 1m3/h and as high as 17m3/h.

Features & Benefits

  • Available as 2-kW & 3-kW “Plug & Play”
  • Easy installation, fully equipped and pre-wired with UK or EU plug
  • Robust, durable construction
  • Ultra-reliable flow switch allows safe operation
  • Supplied with temperature thermostat and overheating sensor
  • Compact, durable design
  • Analogue control with 1.2°C differential
  • Titanium flow tube and titanium heating element
  • Can be floor or vertically wall mounted
  • Vortex, long life, stay clean heating element technology
  • 100% efficiency throughout the product life
  • Silent operation
  • Supplied with water connections for flexible or rigid piping
Document Downloads
220-240V 1 Phase  Load Product Codes: Net Weight Gross Weight Volume
Power Output [Amp] UK Plug (Type G) Euro Plug (Type F) [kg] [kg] [m³]
2-kW 8.5 N-AGP-UK-T2* N-AGP-EU-T2* 2.83 3.54 0.1224
3-kW 12 N-AGP-UK-T* N-AGP-EU-T* 2.83 3.54 0.1224

Weight 50 kg
Dimensions 150 × 150 × 150 cm
Power Supply 220-240V single phase
Flow Requirements Minimum flow: 1m³/h
Maximum flow: 17m³/h
Heating Element Grade 1 titanium
Flow Tube Grade 1 titanium
Control Thermostat Analogue: 0>45°C (1.2°C differential)
Safety Thermal Cut Out 60°C (manual reset)
Flow Switch Gold tipped reed switch with titanium fulcrum pin
Relay Surface mount DPDT Finder
Seals High temperature special formula EPDM ferrules, TPE end fitting gaskets
Water Connections 1.5″ BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for flexible pipe
Ingress Protection Rating IP44
Frequency 50/60 Hz
Working Pressure 4 bar maximum
Mounting Floor or wall mounting